09-22-2013 12:12 AM - edited 07-04-2021 12:54 AM
Hello Team;
We are facing a strange issue with one of the controller in WiSM1. If we need to add WLAN ID 7 in the ap groups, then i need to add the WLAN ID's from 1 to 6 .
But for the other controller i can directly add WLAN ID 7.
Thanks & Regards
Sreejith R
09-22-2013 06:12 AM
That isn't right and probably is a bug. Have you tried to add the WLAN from the cli?
Sent from Cisco Technical Support iPhone App
09-22-2013 06:18 AM
Here is the CLI command:
In order to create a new AP group/WLAN/interface mapping, use this:
config wlan apgroup interface-mapping add
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-22-2013 12:15 PM
But I couldn't find any bug details from Cisco site regarding the ap groups
Sent from Cisco Technical Support iPhone App
09-22-2013 01:39 PM
Doesn't mean all bugs are listed. Open a TAC case and they can let you know.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide