09-09-2014 11:50 AM - edited 07-05-2021 01:29 AM
This message appears in the log controllers and clients for a certain time are unrelated
AP Impersonation of MAC '08:d0:9f:ec:dc:a3' using source MAC '08:d0:9f:ec:dc:a3' is detected by authenticated AP 'ADM_FINANCEIRO' on '802.11b/g' radio and Slot ID '0'.
Could anyone help me?
09-09-2014 11:13 PM
Could be a bug.
What version you running on WLC ?
Regards
09-10-2014 05:16 AM
Hello, thanks for answering
Version controllers 7.6.130.0
Model 2504
AP Model AIR-LAP1142N-T-K9
09-10-2014 05:45 AM
Its look like a cosmetic bug.
Can you connect client to this AP / does it effect the network connectivity ?
There was a bug in earlier version:https://tools.cisco.com/bugsearch/bug/CSCsb90622
If its affecting the network connectivity then you must conatct with TAC.
Regards
Dont forget to rate helpful posts
03-17-2015 08:28 AM
Have you guys come up with any resolution on this issue?
Thanks,
Chris
03-17-2015 02:36 PM
Chris, please check if your current deployment is being effected with bug CSCup88910.
11-21-2014 06:47 AM
Hi,
Did you contacted TAC about this issue? I'm running into the same issue with 7.6.130 code with 2600 AP's.
AP Impersonation of MAC '0c:27:24:12:34:56' using source MAC
'0c:27:24:12:34:56' is detected by authenticated AP 'XYX (same as the MAC address)' on
'802.11b/g' radio and Slot ID '0'.
03-25-2015 02:55 AM
It may be a bug -
Symptom:
AP impersonation alarm are seen in PI, which are found to be false positive
Conditions:
Infrastructure MFP enabled
MFP based AP impersonation detection enabled
Rogue detection enabled.
Workaround:
Disable any of the configurations mentioned in the conditions above.
If it is due to configuration mismatch in AP, try to disable and enable Infra MFP configuration in all the controllers.
Further Problem Description:
Problem is likely to be due to
- malformed beacons coming out occasionally from the AP radio or
- incorrect MFP configuration in one or more AP
The output of show wps mfp statistics might show ' Infra Missing MFP IE 47 Beacon'
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide