01-07-2014 05:21 AM - edited 07-04-2021 11:54 PM
Hello,
Could you help me please?
AP INdoor my 1602 and 1552 outdoor broadcast the SSID but end users are unable to obtain a dynamic IP.
And at my WLC 5508 what security level 2 and 3 choose?
Attached is a shema of my infrastructure.
I only use one port on my WLC 5508, port 1. and my switch are switch level 2 of 2960. do I configure multiple SSIDs?
thank you in advance for your help
Solved! Go to Solution.
01-07-2014 08:25 AM
Make sure you are typing the key exactly as it is in the WLC. Or better yet, do a cut and paste.
If you are connecting to the WLC then you have the correct key. DHCP should work as the AP would be able to decrypt the packets.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide