AP IP address different from end device subnet

[hdiallo01]

Hello guys

I have to deploy a wireless network and I want to know if it'is possible to have AP IP address in a different subnet with my end-device(clients connected via wifi) in other subnet (also different from my wlc management IP address)? If yes, how should I configure to get It done.

Thanks 

[Sandeep Choudhary]

yes it can.

WLC-----Switch-----AP))))))))))))))Client

Here is the guide:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69719-wlc-lwap-config.html

Regards

Dont forget to rate helpful posts

[hdiallo01]

Thanks Sandeep Choudhary

I read the guide but I didn't get what I need, can you give me more hint ?

 For example :

My WLC  (should have 10.10.10.1 as management IP address), my AP  (should have 172.16.50.1 as IP address)  and my client shoud have 192.168.20.0/24.

WLC -----SWITCH-------AP ))))))) client

[Sandeep Choudhary · Accepted solution]

it can work but I GUESS you need to enable inter vlan routing:

1. Conifgure your WLC with mgmt ip : 10.10.10.1

2. Connect AP on swicth port on a vlan (vlan will be on 172.16.50.0)

3. Create dynamic interface on wlc with vlan xx(192.168.20.0)

Regards

Dont forget to rate helpful posts