06-11-2015 07:55 AM - edited 07-05-2021 03:23 AM
Hi everyone,
I am trying to setup Wi Fi for client for time.
I am setting up Management subnet for WLC GUI say 10.10.10.x
Need to know interface for AP-Manager has to be on same subnet as 10.10.10.x?
Also for Management IP to WAP it has to be on same subnet as WLC Management interface right?
Regards
Mahesh
Solved! Go to Solution.
06-11-2015 05:55 PM
What WLC model you using ? if it is 4400,2100 series, yes then you need to put AP manager interface on the same subnet as WLC management.
If it is 5508/2504 series then you do not want AP manager interface. Simply WLC management would do
HTH
Rasika
*** Pls rate all useful responses ***
06-12-2015 06:26 AM
Yes as Rasika said if you are using 5508/2504 series WLCs then you do not required the AP manager interface. Please note that An AP manger can only handle 45 ap each.
Please refer the below link for configuration steps.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_011100.html
06-11-2015 05:55 PM
What WLC model you using ? if it is 4400,2100 series, yes then you need to put AP manager interface on the same subnet as WLC management.
If it is 5508/2504 series then you do not want AP manager interface. Simply WLC management would do
HTH
Rasika
*** Pls rate all useful responses ***
06-12-2015 07:25 AM
Hi Rasika,
I am using wlc 4402.
Regards
MAhesh
06-12-2015 10:31 PM
Mahesh,
Stop wasting on WLC4400. Read this: Cisco Mobility Express Bundle
Promo ends 30 June 2015. Act quickly.
06-13-2015 07:21 AM
I agree with Leo here:) get the bundle and get a newer model WLC. I'm surprised that the 440x is still working well. The issue is the limited code version that you can get on that model and access point support. Newer clients might have stability issues because how old the code is on the WLC. Standards and enhancement are implemented in the code and this is the same for client end devices. Clients with newer NIC's or NIC's with newer drivers might have issues. Good luck though... Nice to see that a 440x is still functioning. I have one in my lab, but not constantly powered up.
-Scott
06-13-2015 05:00 PM
Scott,
I've got 6 WiSM-1. You want to buy them for your museum? ;)
06-12-2015 06:26 AM
Yes as Rasika said if you are using 5508/2504 series WLCs then you do not required the AP manager interface. Please note that An AP manger can only handle 45 ap each.
Please refer the below link for configuration steps.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_011100.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide