02-09-2012 11:04 PM - edited 07-03-2021 09:33 PM
We have two WLC 5508 and i want to know if it is possible to get an accesspoint ( eg. 1131) to connect to a controller over internet, without VPN-connection. I have read documents about HREAP but that needs, if I understands it correcly, a VPN tunnel or a dedicated WAN-link. I know that ARUBA has this function, but I cant find it with CISCO.
Solved! Go to Solution.
02-10-2012 05:18 AM
Yes you can. You would have to use the 1131 as an OfficeExtend AP. At least this way you can encrypt your data traffic unless you are in Russia. Take a look at the AP600 OfficeExtend configuration guide. This will show you how to setup your wlc and your SSID.
Sent from Cisco Technical Support iPhone App
02-10-2012 05:18 AM
Yes you can. You would have to use the 1131 as an OfficeExtend AP. At least this way you can encrypt your data traffic unless you are in Russia. Take a look at the AP600 OfficeExtend configuration guide. This will show you how to setup your wlc and your SSID.
Sent from Cisco Technical Support iPhone App
02-10-2012 05:46 AM
Just to note.... You can have the AP join in local or h-reap (if supported by the AP) without data encryption and don't need to set the ap as an OfficeExtend AP, but I would think you would want data to be encrypted over the Internet.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide