09-12-2013 09:35 PM - edited 07-04-2021 12:49 AM
Hi All,
I am facing follwing issue with Cisco WLC 2106 controller and the ios is 4.2.130. But controller is well configured and all 802.11g clients are accessing.
Ap's interface 802.11b operational status down base mac add cause: admin configured.
And 802.11b clients are in probing stage.
Regards,
Satish.
09-12-2013 09:41 PM
Possibly means the AP's 802.11b radio is disabled administrively.
Check the AP in question and confirm the radio is enabled.
09-12-2013 09:56 PM
In WLC all 802.11b/g AP's status is showing up and supported.
Where i want to check the status.. In the AP or WLC ?
09-12-2013 10:05 PM
Post the complete output to the command "sh ap config 802.11b
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide