Ap's interface 802.11b operational status down base mac add cause: admin configured

[satish Chowdary]

Hi All,

I  am facing follwing issue with Cisco WLC 2106 controller and the ios is 4.2.130. But controller is well configured and all 802.11g clients are accessing.

Ap's interface 802.11b operational status down base mac add cause: admin configured.

And 802.11b clients are in probing stage.

Regards,

Satish.

[Leo Laohoo]

Possibly means the AP's 802.11b radio is disabled administrively.

Check the AP in question and confirm the radio is enabled. 

[satish Chowdary]

In WLC all 802.11b/g AP's status is showing up and supported.

Where i want to check the status.. In the AP or WLC ?

[Leo Laohoo]

Post the complete output to the command "sh ap config 802.11b ".