AP2800 Gigabit Port

[toskie9999]

hi guys is it possible to for the port of AP2800 to be configured separately. In which Port 1 will be connecting to the POE switch while Port 2 will be connected to either an IP Phone or a PC(might be a different VLAN from the broadcast SSID). I think it is possible but I have not find a document that details how to do it.

Thanks

[patoberli · Accepted solution]

As far as I know, this port can't be used to attach a different device. The idea of this port is to form a channel to the Switch, so that you have 2 Gbps instead of 1Gbps.
There here for information about the AUX port:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_cisco_aironet_series_2800_3800_access_point_deployment_guide/b_cisco_aironet_series_2800_3800_access_point_deployment_guide_chapter_01100.html

[Leo Laohoo · Accepted solution]

Not possible.  For this kind of setup, you'll need an OEAP like the AP700.