cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
212
Views
0
Helpful
1
Replies

AP3800s Timeout

HumptyD-UK
Level 1
Level 1

Hello !

I have two AP3800s, One as an ME, one as CAPWAP.   
Both are using latest release and the ME, has had a factory reset... Both indicate running at full power via PoE

I am using two SG350-10MP s in a disy chain (the middle swtich is an SG350SFP) , I've set UDP helper for CAPWAP UDP ports on three switches..

The device as ME, clients stay connected and are unaffected,  While the CAPWAP, clients get dumped so have swiched off the RF for the time being.  

I keep seeing this on the CAPWAP device.


[*09/02/2024 09:12:17.3205] Max retransmission count exceeded, going back to DISCOVER mode.
[*09/02/2024 09:12:17.3205] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 34, len = 196, eleLen = 204, sendSeqNu m = 13
[*09/02/2024 09:12:17.3205] ...Vendor SubType: AP_CDP_CACHE_PAYLOAD(24) len: 192 vendId 409600
[*09/02/2024 09:12:17.3205] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 6, len = 1368, eleLen = 1376, sendSeqN um = 13
[*09/02/2024 09:12:17.3206] ...Vendor SubType: AP_PATH_MTU_PAYLOAD(73) len: 1364 vendId 409600
[*09/02/2024 09:12:17.3206] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 34, len = 863, eleLen = 871, sendSeqNu m = 13
[*09/02/2024 09:12:17.3206] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 34, len = 38, eleLen = 46, sendSeqNum = 13
[*09/02/2024 09:12:17.3206] ....TLV: TLV_ECHOPAYLOAD(42), level: 0, seq: 0, nested: true
[*09/02/2024 09:12:17.3207] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 34, len = 64, eleLen = 72, sendSeqNum = 13
[*09/02/2024 09:12:17.3207] ....TLV: TLV_APETHERINTFPAYLOAD(46), level: 0, seq: 0, nested: true
[*09/02/2024 09:12:17.3207] Dropping msg CAPWAP_WTP_EVENT_REQUEST, type = 34, len = 64, eleLen = 72, sendSeqNum = 13
[*09/02/2024 09:12:17.3207] ....TLV: TLV_APETHERINTFPAYLOAD(46), level: 0, seq: 0, nested: true
[*09/02/2024 09:12:17.3210] Flexconnect Switching to Standalone Mode!
[*09/02/2024 09:12:17.6076]
[*09/02/2024 09:12:17.6076] CAPWAP State: DTLS Teardown
[*09/02/2024 09:12:18.6875] upgrade.sh: Script called with args:[ABORT]
[*09/02/2024 09:12:18.7450] do ABORT, part1 is active part
[*09/02/2024 09:12:18.7678] upgrade.sh: Cleanup tmp files ...
[*09/02/2024 09:12:33.6133] Discovery Response from 192.x.y.z

The syslog outputs thus,
02-09-2024 10:12:18 Local7.Error 192.168.1.250 Controller-00: *spamApTask0: Sep 02 10:12:18.135: %LWAPP-3-AP_DEL: spam_lrad.c:6090 40:a:b:c:d: Entry deleted for AP: 192..xx.y.z (5248) reason : Normal Termination.
02-09-2024 10:12:18 Local7.Notice 192.168.1.250 Controller-00: *spamApTask0: Sep 02 10:12:18.134: %DTLS-5-PEER_DISCONNECT: openssl_dtls.c:1038 DTLS peer 192.x.y.z has closed connection.


<edit>It would seem the controller is loosing connection with it's own AP? (in flex mode..)

Any thoughts?
HumptyD



 

 

1 Reply 1

marce1000
Hall of Fame
Hall of Fame

 

 - What do you mean by : set UDP helper for CAPWAP ports and how was this done ?

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card