APs and WLC

[Azo1]

How can i configure my APs or WLC to find each other? I am using WLC-3504 and AccessPoint-PT

[Parithosh Vema]

Hello @Azo1,
So you can do any of the following: 

If static, then you can logon to the AP and do the following: 
AP#capwap ap primary-base <WLCName> <WLCIP>

Also refer: https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/119286-lap-notjoin-wlc-tshoot.html

[Rich R]

@Azo1 Cisco WLC only supports Cisco CAPWAP (lightweight) Access Points.
AccessPoint-PT (whatever that may be) does not sound like a Cisco AP.
If it is a Cisco AP you need to provide the exact model of AP you are using?