APs loses configuration after registered into WLC

[rohitbhanu009]

Hi,

We have 8540 WLC controller and AP model is 2702. We observed After rebooting APs, Aps loses its configuration like Nme and VLAN assignment.

IS some one has any clue on this please suggest.

.

.Controller software is 8.2.130

Thanks

Rohit 

[Leo Laohoo]

This is a known issue with 8.1 and 8.2 firmware.  What is the firmware controller is running on?

[rohitbhanu009]

Hi Leo,

Thanks for reply

Controller IOS is 8.2.130.

Please suggest which one we need to install to fix this problem.

Thanks in advance.

[Leo Laohoo]

As far as I can remember, this issue is evident in 8.0, 8.1 and 8.2.  

Upgrade the 8.3 and see if it improves things.