09-26-2011 11:42 AM - edited 07-03-2021 08:49 PM
Hi,
I've been configuring the archive command on all the switches and routers in the enviroment. I really like this way of saving configs. As soon as I write mem, it is saved right to a file. Is there a way to configure it on the controllers? I tried: "archive" and it just says unrecognized.
Thanks, Pat.
09-26-2011 11:48 AM
On the WLC, the command is save config, and is saved as a XML file by default. Granted you can't see this directly in the AireOS, you have to do an upload of the config to get it.
HTH,
Steve
09-26-2011 12:51 PM
Thanks for the response. I know that the save command is different on the WLC and I can up load a config by going to command then upload, put in all the info and the upload it but, that being said, is there a way to configure the switch to automatically copy a config to a tftp server after I issue the save config command? Or, when I am in the GUI and click the save configuration?
Thanks, Pat.
09-26-2011 01:03 PM
not to my knowledge. About the best I can think of would be either a shell or expect script to issue the commands and then upload to a server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide