cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
665
Views
0
Helpful
2
Replies

Authentication Error

gojericho0
Level 1
Level 1

I am currently upgraded my 871W to AdvanceIPServices 12.4(22)T IOS which was done to fix a bug with not broadcasting my SSID.

Since then I have been having authentication issues. I am using WPA with PSK. My PC and the rest of the network devices can connect to the wireless router initially, but if the connection is terminated for whatever reason and I attempt to reconnect a device I receive an authentication error.

Attached is my current configuration. Any help would be appreciated

1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

Couple of questions, are you using the 87x as a bridge? do you have reallllllly old devices in your network? If not:

dot11 ssid cisco

vlan 1 <---not needed

authentication open

authentication shared <---not needed

authentication key-management wpa

guest-mode

infrastructure-ssid <---not needed

From the config, you don't need to have the VLAN statement in the SSID, and you don't need the sub-interface under the radio. Just put the main interface in bridge-group 1.

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

2 Replies 2

Stephen Rodriguez
Cisco Employee
Cisco Employee

Couple of questions, are you using the 87x as a bridge? do you have reallllllly old devices in your network? If not:

dot11 ssid cisco

vlan 1 <---not needed

authentication open

authentication shared <---not needed

authentication key-management wpa

guest-mode

infrastructure-ssid <---not needed

From the config, you don't need to have the VLAN statement in the SSID, and you don't need the sub-interface under the radio. Just put the main interface in bridge-group 1.

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Steve not sure why, but when i took the authentication shared command out it started working properly.

Review Cisco Networking products for a $25 gift card