We have Cisco 3500 Wireless controller and 16 AIR-AP1852E
Controller connected to switch and port configured as a trunk
All IP Vlan are configured Cisco switch 3850
We have total 2 Wireless network configured over WLC
1.Staff WiFi Vlan 10 in switch
2. Corporate WiFi Vlan 20 in switch
we have a printer directly connected to switch port and assigned to vlan 20, now we have a problem from Staff WiFi mobile users not able to discover the printer which is connected vlan 20.
But i can able to ping the printer and with laptop i can able to access the printer as well
kindly help me to find the reason and finding a solution for this.
Here is the deployment guide for bonjour with the WLC
You will probably also need to make sure that multicast routing is working on the wired side as well
Sure you can turn on the Bonjour services on your Staff WiFi and Corporate WiFi network address.
Please find below the configuration book for new Cisco DNA Service for Bonjour guide:
The SDG Agent configuration chapter provides sample configuration to enable Print services on the Cisco Catalyst switches.
Please note, you need minimum of 16.11.1 IOS-XE release on Catalyst 3850 series switch to implement policies with new CLI syntax...