Autonomous 1602 GUI error

[Tatiana Vargova]

Hello all,

we are facing some issues during testing autonomous 1602 for future deployment.

We are using AIR-SAP1602E-E-K9 with IOS version 15.2.(2) JB.

After activating both 2,4GHz and 5GHz radios the Status Tab of both shows Transmission Power - Error (Transimetter-error.png). However it is possible to connect to both radios also no errors found in syslog.

The second issue is that configuration of channel for 5GHz radio with GUI is not possible (Channel undefined -error.png) but it seems manual configuration through cli is working (tested with command channel 56: Tha channel changed but the dropdownlist still showing error).

Is it just a buggy GUI? If yes, what can I do with it (IOS upgrade)?

Do anyone have a different idea?

Thanks in advance.

Tatiana

[Scott Fella · Accepted solution]

v15 IOS for AP's seem to be buggy. I make all the config changes through the cli and that's probably where you want to make changes.

Sent from Cisco Technical Support iPhone App

[Abhishek Abhishek]

Hello,

As per your query i can suggest you the following document to refer-

http://www.cisco.com/en/US/docs/wireless/access_point/1600/quick/guide/ap1600getstart.html

Hope this will help you.