Autonomous AP

[cisco.plus]

Hi All

Any additional config required for a Autonomous Access Point to provide IP address to wireless client via Windows 2008R2 dhcp box, considering AP and Windows Server are in the same vlan

cheers

CP

[kcnajaf]

Nope.

As long as the SSID is mapped to correct VLAN there is not additional configuration on the AP especially when the AP and DHCP server is on same vlan. If they are on different ip subnets you need to have ip-helper configured on the L3 interface.

Hope that helps.

Regards

Najaf

Please rate when applicable or helpful !!!

[Saurav Lodh]

I agree, you just need to have ip-helper, if the Ap and the dhcp are on different subnets. Rest is ok