cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
705
Views
0
Helpful
3
Replies

Cannot connect to second SSID on Aironet 1231

wrathyimp
Level 1
Level 1

Hi,

I have configure my AP with to SSID (11 & 12), but I cannot connect to 12. It authenticates, and while trying to acquire IP address from 12, it fails and connects me to 11 (if I have already saved the SSID connection).

The following is my AP status:

Product/Model Number:AIR-AP1231G-A-K9
System Software Filename:c1200-k9w7-tar.123-8.JEE
System Software Version:12.3(8)JEE
Bootloader Version:12.3(2)JA4

The SSID 12 already have 4 clients connected, And I am tring to connect a 5th one (smart phone), but cannot connect to 12, instead coneected to 11. Also tried with a laptop, but cant get the IP address, and give Limited Connectivity error.

How can i fix this issue.

3 Replies 3

Saurav Lodh
Level 7
Level 7

Please remove any one of the client  among the 4 clients which are already connected to 12 and check if it can connect to it again. Also try rebooting the AP.

I have tried restarting the AP, but the same results.

I have tested with a client already connected, by disconnecting and reconnecting.

Its just normal on that device, I have also disconnected all, and connected my device, it fails to connect; its mentioned as disabled when we scan for the AP.

This is really every strange, that only some are connected and will be connected, but rest will never ever connect.

Do I have to reset to factory and reconfigure the device.

Thanks

Review Cisco Networking for a $25 gift card