03-07-2007 10:11 AM - edited 07-03-2021 01:45 PM
Have been looking at BBSM 5.3 and can see that you can configure Foreign IP Address (which pickup static address in a range defined on Wireless Clients) but wonder if the BBSM can be configured for IP PnP whereby it will NAT the IP address of Wireless Client with a static address that attaches to it via a Cisco AP.
03-13-2007 11:23 AM
A client configured with a fully qualified static IP address configuration: IP address,Subnet Mask, Gateway and DNS, would be adaptively NAT'd to an address in BBSM's foriegn range. The DNS entry can be omitted if the client is configured for web proxy.Refer http://cisco.com/en/US/products/sw/netmgtsw/ps533/products_tech_note09186a008009462b.shtml#topic2-2 for more information
03-16-2007 10:03 AM
Thanks for the reply I thought the foreign address was how it was done but it wasn't initially working due to a config error.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide