08-28-2006 11:45 PM - edited 07-04-2021 12:56 PM
Hello,
anyone can help me find the command to use to deny any host to communicate with an other connected at the same access point?
I have a 1231 Aironet AP.
Thanks,
Omar,
Solved! Go to Solution.
08-29-2006 12:04 AM
Hi Omar
under "interface Dot11Radio0" use:
bridge-group 1 port-protected
For more info:http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00801d0179.html#wp1038494
Hope this helps
08-29-2006 12:04 AM
Hi Omar
under "interface Dot11Radio0" use:
bridge-group 1 port-protected
For more info:http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00801d0179.html#wp1038494
Hope this helps
08-29-2006 04:18 AM
In the WebGUI, under the radio config, there's a checkbox labeled "Public Secure Packet Forwarding (PSPF) ... checking that (enabling it) will prevent a client of the access point from accessing another client on the same access point.
Good Luck
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide