08-24-2010 12:32 PM - edited 07-03-2021 07:07 PM
Hi
I wanted to know if someone can tell me if i can do what i'm about to ask and if so how.
I have a site that has users some work in the building and some work in a trailer outside the building.
the users in the trailer want to use phones so what they wanted me to do is this.Take a bridge and
connect it up in the building and take another switch and put it in the trailer and plug the other bridge
into a port that i've configured as a trunk.From that they want the to pass out IP addresses for the
desktops and the phones.I wanted to know if this can be done and if it can how. I've been trying to
configure one of the bridges as an non root bridge and everytime i try the screen locks up and goes
white and i have to unplug the cat5 to get it to come back up. The one that i configured as a root bridge
works fine i'm just having a problem with the non root bridge.Thanks in advance and have a great day
Solved! Go to Solution.
08-24-2010 03:15 PM
Point-to-Point wireless bridge to pass Voice???? No offense to you but are they serious???
It's "do-able" but I can't guarantee 100% voice. It sure is very risky if you are not in the range, radio interference, improper antennae alignment, etc.
08-24-2010 03:15 PM
Point-to-Point wireless bridge to pass Voice???? No offense to you but are they serious???
It's "do-able" but I can't guarantee 100% voice. It sure is very risky if you are not in the range, radio interference, improper antennae alignment, etc.
08-24-2010 03:33 PM
None taken but i was just asking because this is what they wanted me to do.Thanks for the response and i willl let them know what you said because you are right.That is considered voice over wireless and that is going to be kinda tuff
08-24-2010 09:05 PM
Thanks for the ratings.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide