Bundling 2 wireless 1300

[binoyjosephstanly]

Hi all

i have 4 1300AP/BR i want to connect my branch office which is 3 km away.i have 4 1300 equipments with 12 dBi antenna 2 no's and 13.5 dBi antenna 2 no's.is it possible to put 2 1300 at H.O and 2 at Branch .and one will give you 54 mbps , so if i put 2 equipments at each site is it possible to attain 100mbps i mean bundling, is it possible.

i will appreciate any inputs

Thanks & regds

Binoy.

[ebreniz]

You can make use of PAgP with wireless , but not that direct.

Try out the below document.

http://www.cisco.com/en/US/about/ac123/ac114/ac173/ac170/about_cisco_packet_department09186a008010176b.html

[ulstegner]

Hi,

Cisco recommend to use a channel over both Rf Links.

A other way is a L3 connection with a routing protocol or a L3 Channel :

if port-channel 1

ip address ....

int fast 0/1

channel-group 1

int fast 0/2

channel-group 1

regards Ulrich