C9800 ssh configuration

[Leftz]

Hi C9800 WLC's ssh configuration is normal as cisco switch? Looks like we do not need some steps such as ip domain and crypto key.  is this true? Thanks

[Flavio Miranda · Accepted solution]

Hi

  Cisco 9800 WLC is a switch.  As far as I know, nothing changed.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/config-guide/b_wl_17_3_cg/m_config_secure_shell_ewlc.html 

[Leftz]

Thanks 

[Flavio Miranda · Accepted solution]

Maybe the added domain name, activated the SSH and deleted after that. 

"When generating the RSA key pair, the message No domain specified might appear. If it does, you must configure an IP domain name by using the ip domain-name global configuration command."

The information say "when generating the RSA..." 

[Leftz]

Thank you, resolved!

[marce1000 · Accepted solution]

 - FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/secure-shell.html

 M.