Can I connect an Areonet 1200 as a bridge to a Linksys E1000?

[Michael Durham]

I am needing to setup my Aironet 1231 to connect some remote computers to a Cisco home wifi unit wirelessly.

Here is what I need:

CiscoLinksys E1000 provides my wireless Internet connection in building A ----> Cisco Airnet 1231 is in building B and cat5 cable cannot be run between the buildings.  Building B can see building A's wifi signal but only on one side.  I need to provide wifi Internet to the entire B building.  ---> Cisco 3550 PoE switch ----> another Areonet 1231 ---> Laptops via wifi.

          OR

CiscoLinksys E1000 ----> Cisco Airnet 1231 ---> Wifi PC's

Either setup will work. My goal is to provide Internet access to one or more laptops via wifi.  How would you set up the Areonet?

     As a: Root bridge, Non-root bridge, or a Workgroup bridge?

[Scott Fella]

You can try using a WGB. I have never tried it connecting to what you have though. Here is a link.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_example09186a00805b9b87.shtml

Sent from Cisco Technical Support iPhone App

[George Stefanick]

Just to add you want universal wgb mode. Here is another link to reference ..

https://supportforums.cisco.com/docs/DOC-4863

Sent from Cisco Technical Support iPad App