cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
874
Views
0
Helpful
6
Replies

Can´t apply a template with WLSE

acamara
Level 1
Level 1

I have a network with some Cisco 1200 Series AP´s. This ap´s have 802.11G radios. When I configure a new template, in the last pass (SAVE) I receivedthis message:

Error processing template configurations. No valid device versions supported.

This is the Preview that the WLSE show me, when I use a trial template:

aaa new-model

aaa group server radius rad_eap

aaa group server radius rad_mac

aaa group server radius rad_acct

aaa group server radius rad_admin

aaa group server tacacs+ tac_admin

aaa group server radius dummy

aaa authentication login eap_methods group rad_eap

aaa authentication login mac_methods local

aaa authorization exec default local

aaa accounting network acct_methods start-stop group rad_acct

radius-server attribute 32 include-in-access-req format %h

radius-server vsa send accounting

radius-server host 192.168.10.237 auth-port 1645 acct-port 1646 key 0 ******

aaa group server radius rad_eap

server 192.168.10.237 auth-port 1645 acct-port 1646

aaa group server radius rad_admin

server 192.168.10.237 auth-port 1645 acct-port 1646

Services: HTTP- Web Server

ip http server

ip http port 80

ip http help-path xxxx

Services: CDP-Cisco Discovery Protocol

cdp run

interface FastEthernet 0

cdp enable

interface Dot11Radio 0

no cdp enable

interface Dot11Radio 1

no cdp enable

Services:Proxy Mobile IP

no ip proxy-mobile enable

Basic Security

aaa new-model

aaa group server radius rad_mac

aaa authentication login mac_methods local

aaa authorization exec default local

aaa group server radius rad_acct

aaa accounting network acct_methods start-stop group rad_acct

aaa group server radius rad_admin

aaa group server tacacs+ tac_admin

aaa group server radius dummy

radius-server attribute 32 include-in-access-req format %h

radius-server vsa send accounting

radius-server authorization permit missing Service-Type

radius-server host 192.168.10.237 key 0 ******

aaa group server radius rad_eap

server 192.168.10.237

aaa authentication login eap_methods group rad_eap

dot11 ssid prueba

no guest-mode

authentication network-eap eap_methods

authentication key-management wpa

interface Dot11Radio 0

encryption mode ciphers tkip

ssid prueba

Security : WEP Key Manager 802.11b/g

interface Dot11Radio 0

encryption mode ciphers tkip

Network Interfaces: FastEthernet Settings

interface FastEthernet 0

duplex auto

speed auto

no shutdown

Services: SNMP- Simple Network Management Protocol

no snmp-server

Security: Admin Access

aaa new-model

no aaa authentication login default

no aaa authorization exec default

no ip http authentication aaa

enable secret 0 ******

username root privilege 2 password ******

Basic Settings

ip default-gateway 192.168.10.113

ip http server

no ip http secure-server

interface Dot11Radio 0

station-role root

speed throughput

dot11 extension aironet

snmp-server view basic iso included

snmp-server view basic ieee802dot11 included

snmp-server community public view basic ro

Services: Telnet/SSH

access-list 111 permit tcp any any neq telnet

line 0 16

access-class 111 in

hostname ap6

ip domain-name prueba.es

crypto key generate rsa general-keys modulus 512

crypto key generate rsa general-keys modulus 512

Network Interfaces: Radio-802.11b/g

interface Dot11Radio 0

no shutdown

station-role root

antenna gain 8

dot11 extension aironet

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

power local cck 5

power local ofdm 10

power client max

no world-mode

channel least-congested

antenna receive diversity

antenna transmit diversity

Thanks and sorry for my bad english,

Alejandro Camara

acamara@alcaac.com

6 Replies 6

rmushtaq
Level 8
Level 8

You can ignore 'Error processing template configurations. No valid device versions supported'. This is fixed in the latest WLSE version

Last mont I have WLSE version 2.5, but now I´m using WLSE 2.11 (the lastest) and I have the same problem.

Are you using the Custom Value section of the template?

Sorry, but I don´t understand. When you say me "the Custom Value of the template", what are you talking about?

I generate the template with "new template" and I see "a wizard" where I mark the options of the configuration that I need to use (ssid, radio, channel, etc..)

Sorry but my english is very bad.

Thanks again.

Alejandro Camara Acevedo

acamara@alcaac.com

I have had similar results when I added NTP settings to a template.

eebellm
Level 1
Level 1

I had the same issue with 2.11 and c1200-k9w7-tar.123-7.JA. I had to upgrade the WLSE to 2.12 to support the new AP image

Review Cisco Networking for a $25 gift card