cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13137
Views
0
Helpful
4
Replies

Can't configure AIR-CAP 1702I

steenborlum
Level 1
Level 1

Hi,

 

I want to try my first cisco product, so I got a AIR-CAP1702I-E-K9.

Directly I got stuck, I have google and google, and everybody just say do this and this, but it won't work on my AP.

I have include a file, with all startup info, and a list off command I can run.

Some tips say run web gui, AP got a IP but will not answer.

Some tips say, login by console, type en and password (Cisco), then run command conf -t, but this command is not there.

On boot I see some errors, on is this "Config load from flash failed. Initialising Cfg".

I'm stuck, any help is welcome.

 

Thanks

Steen

 

4 Replies 4

Stephen Rodriguez
Cisco Employee
Cisco Employee

you need to convert the AP from CAPWAP to aIOS. take a look at Rasika's blog post

 

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

relmoudi1
Level 1
Level 1

To get to global configuration mode at the previ exec mode type

Ap# debug capwap console cli

hit enter,

AP# conf t

you will get

AP(config)#

 

Hi,

 

Thanks both of you, I come a bit forward.

I learn also that I need a central configuration HW (more money), is it possible to make this unit a single unit like a normal AP?

How do I enable WEB GUI on this unit?

 

/Steen

 

Abhishek Abhishek
Cisco Employee
Cisco Employee

Please refer to the AIR-CAP1702I-E-K9 configuration guide-

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1700/quick/guide/ap1700getstart.pdf

Review Cisco Networking for a $25 gift card