Can you run dual SSIDs (Private and Guest) and put a time restriction on the Guest Network to only work certain hours of the day

[len000001]

Is there a way to run dual SSIDs (private and guest) but only allow the Guest Network to work during certain hours of the day?

[Sandeep Choudhary]

Hi,

If I understand your question correctly  that you want to schedule one of these WLANs to automatically disable at X time and enable at X time each day ?

If you have WCS/NCS/Prime Infrastructure then you can use these features.

Here is the way of configuration:

https://supportforums.cisco.com/document/58081/managing-wireless-lan-status-schedules-automatic-enabledisable-feature

Regards

Dont forget to rate helpful posts

[Scott Fella]

Just to add.... you can't do this on the WLC itself.  Like Sandeep mentioned, you can use WCS/NCS or PI or you can use ACLS for time based access:

http://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-configuration-monitoring/11035-time-qos.html#topic1

http://www.cisco.com/c/en/us/support/docs/security/ios-firewall/23602-confaccesslists.html#timebasedtimerange

[dan.letkeman]

I have done this by using a time based acl on the adjacent switch.

Dan.