Cannot access Controller from LAN , but can access from wireless

ciscokid7181 · ‎01-10-2012

Dear Folks,

I have noticed a strange thing during deployment of 5500 series controller. I could only access controller from Wi-fi and from VPN network.

Accessing controller from LAN wasn't possible. Could you please advise on how it can be resolved?

Sent from Cisco Technical Support iPad App

Stephen Rodriguez · ‎01-10-2012

how is the WLC connected ti the LAN? Are you on a VLAN that you have a dynamic interface created for?

Sent from Cisco Technical Support iPhone App

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Darren Lynn · ‎01-10-2012

Check the default gateway of the LAN device you're using, or failing that ensure that the network you're on has a route to the management interface of the WLC.

George Stefanick · ‎01-10-2012

Can you post the show run-config ?

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Cannot access Controller from LAN , but can access from wireless or VPN network