Cannot configuration of air-cap2602i-e-k9

[tk.linukka]

Hello.

Resetting the Device to Default is made but I can't use any configuration.

Seems like trouble is version of ap-ios, it's ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx

Can't download another version, seems like I haven't right's to do it!?

How to fix it?

Best regards Tk

version:
Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JA, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 23-Aug-12 02:43 by prod_rel_team

ROM: Bootstrap program is C2600 boot loader
BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)

APfc99.47d9.a659 uptime is 5 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
Last reload reason:



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:


If you require further assistance please contact us by sending email to


cisco AIR-CAP2602I-E-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FGL1648Z0GB
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.3.1.73
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: FC:99:47:D9:A6:59
Part Number                          : 73-14588-02
PCA Assembly Number                  : 800-37899-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC16456HUA
Top Assembly Part Number             : 800-38356-01
Top Assembly Serial Number           : FGL1648Z0GB
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2602I-E-K9

[Sandeep Choudhary]

AP is running with CAPWAP image therefore you need a cisco WLC to make it (2602AP) work.

If you dont want a WLC then you to upload autonomous software version on this AP to make it as standalone.

Standalone software download: https://software.cisco.com/download/home/284362257/type/284180979/release/15.3.3-JF15

Regards

Dont forget to rate helpful posts

[tk.linukka]

Can't download:

Log In and Service Contract Required

To Download this software, you must and have a valid service contract associated to your Cisco.com profile.

If you do not have a service contract you can get one through:

• Your Cisco Account Team if you have a direct purchase agreement with Cisco
• Your Cisco Partner or Reseller

Once you have the service contract you must associate your service contract to your Cisco.com user ID with

[Scott Fella]

Without support, you will not be able to do anything.  Maybe search the internet and see if anyone has posted the image you need somewhere.  That is the biggest issue we see here, folks buying ap's and not knowing what code they need for what they want to do with the AP.  Hopefully you can find the image somewhere so that the ap is not a door stop.  

[patoberli]

A little bit more information about the image you need, the filename will start with this: ap3g2-k9w7-tar.153-3.JF15.tar

ap3g2 means the generation of the AP model

k9w7 means it's an autonomous image (whereas k9w8 is a CAPWAP image requiring a WLC)

The rest of the filename is basically the specific release version. So any image starting with ap3g2-k9w7-tar should work on your AP.

Once you have an image, check the CAPWAP to Autonomous conversion guide.