03-27-2023 06:21 PM
Hi,
We recently installed Cisco wireless with C9800-CL WLC (x2) managed by DNAC.
We have two clients, a mobile and chromecast, on the same SSID and we're trying to cast from the mobile device.
However, the mobile device cannot even discover the chromecast. Is there a specific config that needs to be enabled for this to work. We're mostly working with default mDNS and multicast configuration as both devices are part of the same WLAN/VLAN.
WLC version 17.6.4
Appreciate some assistance here.
Sajid
03-27-2023 07:58 PM
03-27-2023 09:21 PM
Hi. Thanks for your response. I went over the guide. I know we can enable mDNS gateway but our setup is chromecast and other devices in the same VLAN/WLAN.
Do we still need to enable and configure mDNS gateway and additional profiles.
03-28-2023 05:46 AM
03-28-2023 06:22 AM
As this is a 9800-CL , what comes to mind that will make a difference here is mDNS set to bridging on the SSIDs ?
Also are your Aps in flexconnect or local mode ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide