I configured MAC authentication on the ACS for AP1200 and have a question for the report interface.
.
MAC authentication works fine and I can see a record the failure report but nothing for others. I want to see a "Login users", "Accounting", "Passed authentication" etc. Any idea why I cannot see these kind of information from ACS's Report interface.
.
- ACS 3.2, added an AP on the network interface with RADIUS(Airopoint) and wireless phone's MAC address on the User interface. nothing else configued.
- AP1200, 12.2(13)JA2.
.
Here my AP1200 configuration.
.
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 192.168.200.134 auth-port 1645 acct-port 1646
aaa group server radius rad_acct
aaa group server radius rad_admin
server 192.168.200.134 auth-port 1645 acct-port 1646
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local group tac_admin group rad_admin
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local group rad_mac
aaa authorization exec default local group tac_admin group rad_admin
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
!
radius-server host 192.168.200.134 auth-port 1645 acct-port 1646 key 7 xxxxx
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
.
Thanks,