cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4465
Views
5
Helpful
9
Replies
peiquan zhang
Beginner

Cannot login to Prime

Hi,

We cannot login to our Prime these days, due to the following error message:

{"message":"Could not open Hibernate Session for transaction; nested exception is org.hibernate.exception.JDBCConnectionException: Cannot open connection"}

We haven't changed the JAVA version. Tried from another PC, still getting the same error. Tried both Firefox and IE, all the same.

Any suggestion? Will it help if I login in from SSH and reboot the server? Thanks a lot.

1 ACCEPTED SOLUTION

Accepted Solutions
peiquan zhang
Beginner

Hi Guys,


Eventually it turns out to be a CISCO bug, please find the article below:


http://transmitfailure.blogspot.fr/2013/04/cisco-prime-infrastructure-bug-id.html

I am lucky that my oracle colleague fixed this with me, but I am very frustrated that we faced the same issue on Prime v2.0. But CISCO announced that this issue is only for v1.2.....

View solution in original post

9 REPLIES 9
Rasika Nayanajith
VIP Mentor

I would log onto CLI and check its status

prime/admin#show application status NCS

if there is no obvious issues could seen on the above,then would restart the service

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/administrator/guide/PIAdminBook/maint_sys_health.html#pgfId-1088333

HTH

Rasika

*** Pls rate all useful responses ***

Hi Rasika,

Thank you for your kindly help, it seems that the Database Server is not running, any suggestion for the next step?

**********************************************************************

prime01/admin# show application status NCS

Health Monitor Server is running.
Ftp Server is running
Database server is stopped           <-------------------Here
Tftp Server is running
Matlab Server is running
NMS Server is running.
Plug and Play Gateway is running.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...

**********************************************************

http://mrncciew.com/2015/11/26/cpi-3-0-disk-running-out-of-space/

Check your disk space for DB, may be run out of space.  

HTH

Rasika

Not really...... I am jsut thinking about a simple stop/start, is that harmless or risky? Thank you Rasika.

****************************************************

ade # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol
                      3.8G  285M  3.4G   8% /
/dev/mapper/smosvg-storeddatavol
                      9.5G  151M  8.9G   2% /storeddata
/dev/mapper/smosvg-localdiskvol
                       43G  4.1G   37G  10% /localdisk
/dev/sda2              97M  5.6M   87M   7% /storedconfig
/dev/mapper/smosvg-home
                       93M  5.6M   83M   7% /home
/dev/mapper/smosvg-optvol
                      200G   81G  109G  43% /opt
/dev/mapper/smosvg-varvol
                      3.8G  600M  3.1G  17% /var
/dev/mapper/smosvg-usrvol
                      6.6G  1.2G  5.1G  19% /usr
/dev/mapper/smosvg-tmpvol
                      1.9G   36M  1.8G   2% /tmp
/dev/mapper/smosvg-recvol
                       93M  5.6M   83M   7% /recovery
/dev/mapper/smosvg-altrootvol
                       93M  5.6M   83M   7% /altroot
/dev/sda1             485M   18M  442M   4% /boot
tmpfs                 7.8G  4.0G  3.9G  51% /dev/shm

********************************************************************

Yes, do a restart & see. It won't harm

if no success reach TAC

HTH

Did you able to get it working ? 

mohanak
Cisco Employee
peiquan zhang
Beginner

Hi Guys,


Eventually it turns out to be a CISCO bug, please find the article below:


http://transmitfailure.blogspot.fr/2013/04/cisco-prime-infrastructure-bug-id.html

I am lucky that my oracle colleague fixed this with me, but I am very frustrated that we faced the same issue on Prime v2.0. But CISCO announced that this issue is only for v1.2.....

View solution in original post

Ran into this issue today, three years later. Prime 2.1 (2.1.0.0.87). Your procedure fixed issue.  Did have to do . oracleenv instead of .. /opt/oracle/oracleenv. Thanks for your post, saved me a lot of time.

Create
Recognize Your Peers
Content for Community-Ad