Cant Connect Cisco AIR-ANT2513P4M-N to AP AIR-AP1572EAC

[csocorro1]

I have an antenna AIR-ANT2513P4M-N and I have to connect it to AP 1572EAC outdoor.

When I tried to make the connection with the cable AIR-CAB005LL-R-N I, I wasnt able because the cable is male and female and the AP & antenna has all their N connectors female, so I couldnt do it.

Do anyone of you know how make this connection or if it is the proper cable?

Thanks in advance,

[mohanak]

AIR-ANT2513P4M-N=

The AP1572 can be used with a directional antenna that connects via cables (either directly attached to the antenna or with separate cables). See Figure 4-3.

AIR-ANT2513P4M-N= comes with its own mounting kit that will allow it to be mounted to the same pole or wall where the AP1572 is also mounted. Four N-male to N-male cables (such as AIR-CAB005LL-N=) are required to connect the antenna to the AP.

Figure 4-3 AIR-CAP1572EAC-x-K9 with AIR-ANT2513P4M-N=

[csocorro1]

Thanks for your response, I read the page that you attached, but I still wasnt able to connect them.

Is there any additional procedure or trick that needs to be done?