CAP2602i and 4400 series controller

[vancamt76]

Can someone tell me if the 2600 series access points are compatible with a 4404 controller running 7.0.235.3 code? I was looking for a compatibilty matrix for the AP to controller to code comparison but couldn't find one.                  

[Scott Fella · Accepted solution]

It will not work. The 2602 requires the v7.2.x. Here is the matrix.

Hope this helps

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App