03-05-2013 06:45 AM - edited 07-03-2021 11:40 PM
Can someone tell me if the 2600 series access points are compatible with a 4404 controller running 7.0.235.3 code? I was looking for a compatibilty matrix for the AP to controller to code comparison but couldn't find one.
Solved! Go to Solution.
03-05-2013 07:06 AM
It will not work. The 2602 requires the v7.2.x. Here is the matrix.
Hope this helps
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App
03-05-2013 07:06 AM
It will not work. The 2602 requires the v7.2.x. Here is the matrix.
Hope this helps
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide