08-29-2013 12:58 PM - edited 07-04-2021 12:44 AM
A strange problem here.
We have EAP-TLS configured on our Windows 2008 R2 NPS server. We have a 3602i in Flexconnect mode. When we set the WLAN to central auth this does not work but rather PEAP-MSCHAPv2 works?
When we switch the WLAN to local auth the EAP-TLS seems to kick in and work. The NPS server has both the AP and WLC set as RADIUS clients and does not show any errors. With Local Auth and Central auth the AAA requests are going to the same NPS server.
Thoughts?
08-31-2013 04:39 AM
Will need to look at the debugs
Debug client
Sent from Cisco Technical Support iPhone App
10-17-2013 03:36 PM
logs are required to check the error message and give some suggestions.
10-17-2013 06:48 PM
Kindly check the following link
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
10-18-2013 05:26 AM
This has been resolved. Not sure what it was but it is working just fine now.
Sorry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide