Change 1310 Autonomous AP to Controller Based

[michaelgitonga]

Hi,

How do I change 1310 Autonomous AP to a Controller based AP for 5508 WLC? Thank you.

Michael.

[Yahya Jaber]

Hello,

here is the way to convert from IOS to LWAPP

https://supportforums.cisco.com/docs/DOC-14960

[George Stefanick]

Here is the code you need

http://software.cisco.com/download/release.html?mdfid=279141937&flowid=7582&softwareid=280775090&release=12.4.21a-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest


Keep in mind that this model only works up to code 7.0. If you are using 7.2 or beyond it will not work.

Sent from Cisco Technical Support iPad App

[michaelgitonga]

Thank you George. I tried out the code and it gives an error 'image family mismatch' on the 1310R access point.

Also can the 1310R AP work as Lightweight in a 5760 controller?

[michaelgitonga]

Thank you Yahya. Also, can the 1310R AP work as Lightweight in a 5760 controller? Thanks.

[Scott Fella]

Nope...

Sent from Cisco Technical Support iPhone App

[Scott Fella]

No... Please see the release notes below

http://www.cisco.com/en/US/docs/wireless/controller/3.2_0_se/release_notes/OL28115_3_2_se_rn.pdf

Sent from Cisco Technical Support iPhone App

[mmangat]

Hello Please have a look at the following doc for converting a 1300 autonomous AP to controller based:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_lwap.html#wp1345331

Hope this helps!