Cisci WLC 2504 client disconnection issue

Satheesh G · ‎09-28-2020

Hi,

Client is disconnecting frequently.Software Version is 8.0.152.0.

Below is the error logs , Please help to resolve this issue.

*apfMsConnTask_1: Sep 29 00:45:23.269: %LWAPP-3-INVALID_SLOT: spam_api.c:1469 The system detects an invalid slot identifier (0) - All the AIDs are in use. Could not allocate association identifier; AP 00:3a:99:58:da:20

Leo Laohoo · ‎09-28-2020

CSCve81314

Rich R · ‎09-29-2020

Yep Leo is right. You'll need to persuade TAC to provide you with a fixed image. We're using 8.0.152.8 which has been stable. If your APs support it then consider upgrading to latest 8.5 release.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390