Cisco 1700 LIghtweight Access Point not Assigning IP addresses
I have a Cisco 1700 Access Point that is not assigning IP addresses on 1 specific SSID. All other SSIDs are working as normal. The AP can reach DHCP and there are more than enough IP addresses available for this location. The AP is associated with a Cisco 5508 Wireless Controller. I've tried to compare the AP's configuration with other working APs and from what I can see is that everything is setup as expected. Can someone provide a checklist of items to check? Any ideas to solve this? Thank you.
It’s been a long road for our AireOS wireless controllers. In fact these products have been around Cisco in some form since 2005. As you may have heard, Cisco made the decision to End-of-Sale (EOS) these products last month.
That means that these AireOS ...
Hello Community, I have an issue where APs do not connect to the WLC. Connection is made over VPN. Until yesterday all 3 APfailed with below errors. We change the LAN connection to a cisco router and now one of the AP magically connected to the...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device Communication
Cisco Fastlane+ is a co-developed solution with Apple that significantly improves the experience of any Wi-Fi 6 capable iPhone or iPad connected to a Cisco Catalyst 9130 A...
We are pleased to announce the immediate availability of the IOS-XE release 17.4.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link: