Welcome to Cisco.
Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.
This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.
[ OK ] Reached target Cisco File Systems (Pre).
[ OK ] Reached target Timers.
[ OK ] Created slice -.slice.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Reached target Sockets.
[ OK ] Created slice system.slice.
[ OK ] Reached target Slices.
Starting Cisco UBIFS reformat/mount...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Started Cisco UBIFS reformat/mount.
Starting Cisco early mount...
[ OK ] Started Cisco early mount.
[ OK ] Reached target Local File Systems (Pre).
Starting Cisco platform file generation...
Starting Cisco system time setup...
[*01/01/1970 00:00:36.1988] Last reload time: Aug 8 10:47:24 2023
[*08/08/2023 10:47:24.0000] Setting system time Tue Aug 8 10:47:24 UTC 2023
Starting Cisco seed generation...
Starting Cisco fips check...
[ OK ] Started Cisco platform file generation.
[ OK ] Started Cisco system time setup.
[ OK ] Started Cisco seed generation.
[ OK ] Started Cisco fips check.
Starting Cisco nolan service...
[ OK ] Reached target Local File Systems.
[ OK ] Started Cisco system time saving.
[*08/08/2023 10:47:24.3299] GCM-128 POST passed
[*08/08/2023 10:47:24.3299] GCM-256 POST passed
Starting Cisco system time saving...
Starting Cisco pkg install service...
Starting Cisco S10 boot service...
[ OK ] Started Cisco nolan service.
[ OK ] Started Cisco S10 boot service.
Starting Cisco watchdog...
[*08/08/2023 10:47:25.7894] === 5G radio domain is 14, COPY 5G BDF files from non_ETSI_BDF folder ===
[*08/08/2023 10:47:25.8194] 1
[*08/08/2023 10:47:26.0793] Active version: 8.10.105.0
[*08/08/2023 10:47:26.0793] Backup version: 8.10.130.0
[*08/08/2023 10:47:26.2793]
[*08/08/2023 10:47:26.2793] led pattern module start
[*08/08/2023 10:47:26.3393] AP1852I
[*08/08/2023 10:47:26.4792] nss_driver - Turbo Support 1
[*08/08/2023 10:47:26.4792] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*08/08/2023 10:47:26.5192] NSS firmware booted
[*08/08/2023 10:47:26.5492] NSS firmware booted
[*08/08/2023 10:47:26.6492]
[*08/08/2023 10:47:26.6492] phy_value=0: org="0x1000" phy_reg="0x1800"
[*08/08/2023 10:47:27.0291] Current value of FACTORY_RESET=0
[*08/08/2023 10:47:27.0790] Last reload time: Aug 8 10:47:24 2023
[*08/08/2023 10:47:24.0000] Setting system time Tue Aug 8 10:47:24 UTC 2023
[*08/08/2023 10:47:24.1099] device wired0 entered promiscuous mode
[*08/08/2023 10:47:24.2199] device wired1 entered promiscuous mode
Starting Cisco nss service...
[ OK ] Started Cisco watchdog.
[ OK ] Started Cisco nss service.
[ OK ] Started Cisco pkg install service.
Starting Cisco S15platform...
[ OK ] Started Cisco nolan USB service.
Starting Cisco nolan USB service...
Starting Cisco Kclick...
[ OK ] Started Cisco Kclick.
[ OK ] Started Cisco S15platform.
Starting Cisco certificate create service...
Starting Cisco ME service...
[*08/08/2023 10:47:26.9391] stile module dp init successfully
[*08/08/2023 10:47:26.9391] NBAR Label:BLD_V169_THROTTLE_LATEST_20180831_073505 Module timestamp: Oct 17 2019 at 05:58:05 User: vipendya
[*08/08/2023 10:47:27.1690] Last reload reason : 0: unknown
[*08/08/2023 10:47:27.6988] Loading sha2...
[*08/08/2023 10:47:27.6988] Dumpping sha1...
Starting Cisco Kclick...
[ OK ] Started Cisco ME service.
[ OK ] Started Cisco Kclick.
Starting Cisco syslog service...
Starting Cisco S16platfomm...
[*08/08/2023 10:47:28.3087] miibus get eee0c000!
Starting rsyslog client...
[ OK ] Started Cisco syslog service.
[ OK ] Started Cisco S16platfomm.
[ OK ] Started rsyslog client.
[*08/08/2023 10:47:29.0084] Loading MIC cert and key
[*08/08/2023 10:47:29.0084] Dumpping sha2...
Starting Cisco synclogd...
[ OK ] Started Cisco synclogd.
[ OK ] Started Cisco certificate create service.
Starting Cisco certtime service...
Starting Cisco brain service...
[ OK ] Started Cisco certtime service.
[ OK ] Started Cisco brain service.
[ OK ] Reached target System Initialization.
[*08/08/2023 10:47:30.2980] Loading MIC cert and key
[*08/08/2023 10:47:31.0378] pid 2644's current affinity mask: 3
[*08/08/2023 10:47:31.0378] pid 2644's new affinity mask: 1
[*08/08/2023 10:47:31.3077] __mm_init_[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
Starting WCPD process...
Starting AP Trace daemon...
[ OK ] Started Serial Getty on ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Reached target Login Prompts.
[ OK ] Started NTP_PROC daemon.
Starting NTP_PROC daemon...
[ OK ] Started System Monitor service.
Starting System Monitor service...
Starting gRPC server daemon...
Starting Cisco printkd...
Starting capwapd...
[*08/08/2023 10:47:32.6673] HTC Rx: insufficient length, got:4 expected =8
[*08/08/2023 10:47:32.6673] Startup Mode-0 set
[*08/08/2023 10:47:32.6673] HTC Service:0x0300 ep:1 TX flow control disabled
[*08/08/2023 10:47:32.6773] HTC Service:0x0100 ep:2 TX[ OK ] Started NSS Firmw are Monitor daemon.
Starting NSS Firmware Monitor daemon...
Starting Hostapd process...
Starting Clean Air daemon...
Starting Cisco led service...
Starting Fast CGI daemon...
Starting Cisco klogd...
Starting OpenSSH server daemon...
[*08/08/2023 10:47:32.9272]
[*08/08/2023 10:47:32.9272] [Flash] : Ignore Module param
[*08/08/2023 10:47:32.9272] ol_ath_download_firmware : Second OTP download and E xecute is good, param=0x0
[*08/08/2023 10:47:32.9372] ol_transfer_bin_file: Downloading firmware file: AR9 00B/ $$HH▒▒Starting Cisco kexec...
Starting Cisco rtd service...
[*08/08/2023 10:47:34.0469] HTC Rx: insufficient length, got:4 expected =8
[*08/08/2023 10:47:34.0469] Startup Mode-0 set
[*08/08/2023 10:47:34.0469] HTC Service:0x0300 ep:1 TX flow control disabled
[*08/08/2023 10:47:34.0469] HTC Service:0x0100 ep:2 TX flow control disabled
[*08/08/2023 10:47:34.0469] Firmware_Build_Number:70
[*08/08/2023 10:47:34.0469] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht _cap_info:0x339b79b2 vht_supp_mcs:0x0000ffaa
[*08/08/2023 10:47:34.0469]
[*08/08/2023 10:47:34.0469] RES CFG Support wmi_service_bitmap 9778
[*08/08/2023 10:47:34.0469]
[*08/08/2023 10:47:34.0469] Sending Ext resource cfg: HOST PLATFORM as 0 and fw _feature_bitmap as 50 to TGT
[*08/08/2023 10:47:34.0469] ol_ath_service_ready_event: sw_cal_support_check_fla g: 1
[*08/08/2023 10:47:34.1168] wmi_ready_event_rx: WMI UNIFIED READY event
[*08/08/2023 10:47:34.1168] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FR AG_DESC_BANK_CFG sent to FW for radio ID = 1
[*08/08/2023 10:47:34.1268] acfg_attach: Offload using existing sock c3c1c600
[*08/08/2023 10:47:34.1268] spectral_init_netlink 81 NULL SKB
[*08/08/2023 10:47:34.1268] ACS not enabled
[*08/08/2023 10:47:34.1368] ol_ath_thermal_mitigation_attach: --
[*08/08/2023 10:47:34.1868] pktlog_init: Initializing Pktlog for AR900B, pktlog _hdr_size = 16
[*08/08/2023 10:47:34.1868] pktlog_init: Initializing Pktlog for AR900B, pktlog _hdr_size = 16
[*08/08/2023 10:47:35.0465] FWLOG: [50333] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0xd eb001, 0x94c, 0x94c, 0x0 )
[*08/08/2023 10:47:35.0465] FWLOG: [50333] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x 1e, 0x94c, 0x94c, 0x0 )
[*08/08/2023 10:47:35.0465] FWLOG: [50333] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x 1e, 0x94c, 0x94c, 0x0 )
[*08/08/2023 10:47:35.0465] FWLOG: [50333] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x 1e, 0x94c, 0x94c, 0x0 )
[*08/08/2023 10:47:35.0465] FWLOG: [50341] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x1 0, 0x0, 0x10, 0x0 )
[*08/08/2023 10:47:36.1262] click-config/io-real.click:372: While configuring 't odev_wired0 :: ToDevice':
[*08/08/2023 10:47:36.1262] warning: device 'wired0' is down
[*08/08/2023 10:47:36.1562] click-config/io-real.click:372: While configuring 'f romde[ OK ] Started Cisco led service.
[ OK ] Started OpenSSH server daemon.
[ OK ] Started Cisco kexec.
[*08/08/2023 10:47:36.7660] click-config/capwap.linuxmodule.template:1161: While initializing 'FromHost@1142 :: FromHost':
[*08/08/2023 10:47:36.7660] no element named '$2'
[*08/08/2023 10:47:36.7660] click-config/io-real.click:372: While initializing
No valid user found, please configure a valid user from Controller[*08/08/2023 1 0:47:37.2758] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgvalid[0] 000000 00 cfgvalid[1] 00000000
[*08/08/2023 10:47:37.2758] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg40000000 cfgv alid[0] 00000000 cfgvalid[1] 00000000
[*08/08/2023 10:47:37.6057] In write handler 'run' for 'set_dns_filtering :: Scr ipt':
[*08/08/2023 10:47:37.6057] no element named 'cli_h/content_filter/filter'
[*08/08/2023 10:47:37.9957] chatter: tohost_srcr6 :: ToHost: device 'srcr6' went down
[*08/08/2023 10:47:38.0157] chatter: tohost_srcr6 :: ToHost: device 'srcr6' came up
[*08/08/2023 10:47:38.0157] ip6_port srcr6, ip6local fe80::2df:1dff:fe70:3800, i p6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 2(slaac )
[*08/08/2023 10:47:42.4643] pid 3725's current affinity mask: 3
[*08/08/2023 10:47:42.4643] pid 3725's new affinity mask: 1
[*08/08/2023 10:47:43.3540] chpasswd: password for user changed
[*08/08/2023 10:47:44.0238] WCP: Opening /tmp/var/platform/board_name failed!
[*08/08/2023 10:47:44.0238] DOT11_TXP[0]:Domain configured: 14 class:S
[*08/08/2023 10:47:44.1737]
[*08/08/2023 10:47:44.1737] USB Device Disconnected from the AP
[*08/08/2023 10:47:44.1737]
[*08/08/2023 10:47:44.5036] WCP: Opening /tmp/var/platform/board_name failed!
[*08/08/2023 10:47:44.5036] DOT11_TXP[0]:Domain configured: 1 class:E
[*08/08/2023 10:47:44.9235] DOT11_DRV[0]: Init Radio0
[*08/08/2023 10:47:44.9535] DOT11_DRV[0]: Stop Radio0 - Begin
[*08/08/2023 10:47:44.9535] DOT11_DRV[0]: set_channel Channel set to 6
[*08/08/2023 10:47:44.9535] WCP: Opening /click/cwx0/radio_stats/vap_chan_util_s tats_support failed!
[*08/08/2023 10:47:44.9635] DOT11_DRV[1]: Init Radio1
[*08/08/2023 10:47:45.0035] DOT11_DRV[1]: Stop Radio1 - Begin
[*08/08/2023 10:47:45.0035] DOT11_DRV[1]: set_channel Channel set to 36
[*08/08/2023 10:47:45.0035] WCP: Opening /click/cwx1/radio_stats/vap_chan_util_s tats_support failed!
[*08/08/2023 10:47:45.4333] DOT11_CFG[0] Radio Mode is changed from Local to Loc al
[*08/08/2023 10:47:45.4333] DOT11_CFG[1] Radio Mode is changed from Local to Loc al
[*08/08/2023 10:47:45.4433] device wired1 left promiscuous mode
[*08/08/2023 10:47:45.4533]
[*08/08/2023 10:47:45.4533] phy_value=0: org="0x1800" phy_reg="0x1800"
[*08/08/2023 10:47:45.6133] DOT11_DRV[0]: set_channel Channel set to 1
[*08/08/2023 10:47:45.6133] DOT11_DRV[0]: Channel set to 1, width 20
[*08/08/2023 10:47:45.6133] DOT11_DRV[0]: Channel set to 1, width 20
[*08/08/2023 10:47:45.6333] DOT11_DRV[1]: set_channel Channel set to 112
[*08/08/2023 10:47:45.6333] DOT11_DRV[1]: Channel set to 112, width 20
[*08/08/2023 10:47:45.6333] DOT11_DRV[1]: Channel set to 112, width 20
[*08/08/2023 10:47:49.7020] Waiting for preferred uplink IP configuration
[*08/08/2023 10:47:54.7204] Waiting for preferred uplink IP configuration
[*08/08/2023 10:47:56.5199] device aptrace0 entered promiscuous mode
[*08/08/2023 10:47:56.5499] device to_container entered promiscuous mode
[*08/08/2023 10:47:59.7289] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:00.7486] Resetting wired0 and restart DHCP client
[*08/08/2023 10:48:06.7667] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:11.7851] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:16.8035] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:17.8132] Resetting wired0 and restart DHCP client
% Authentication failed
[*08/08/2023 10:48:23.8513] Waiting for preferred uplink IP configuration
No valid user found, please configure a valid user from Controller[*08/08/2023 1 0:48:28.8598] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:33.9382] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:34.9579] Resetting wired0 and restart DHCP client
[*08/08/2023 10:48:40.9860] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:46.0144] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:51.0428] Waiting for preferred uplink IP configuration
[*08/08/2023 10:48:52.0525] Resetting wired0 and restart DHCP client
% Authentication failed
No valid user found, please configure a valid user from Controller
[*08/08/2023 10:48:58.0706] Waiting for preferred uplink IP configuration
% Authentication failed
No valid user found, please configure a valid user from Controller[*08/08/2023 1 0:49:03.0891] Waiting for preferred uplink IP configuration
