We need to trace a customer's ipad which has been lost & was connected to one of our AP 2 months ago. Is there any way in 9800 WLC that we can get any sort of logs like on which AP it was last associated with using radioactive trace or something? Ou...
Forum Posts
Resolved! Strange Results TDR Cable-Test
Has anyone seen all remote pairs showing as "Pair A" and Not Supported? Below are the results from the switch. For reference this is on a Catalyst 3850 with an Aironet 1852i access point on the distant end. This AP has been going down every few days ...
Hi,I have a P2P mesh setup with a root/mesh. I have VLAN transparent disabled and Ethernet bridging enabled in the mesh profile as I'm carrying multiple VLAN's over a trunk.I have some questions in regards to the screenshot below.What is the differe...
I am trying to configure 2 9124AXD's (one RAP with EWC and one MAP) running ios 17.11.1 and the instructions say to click on the Mesh Tab but it doesnt exist. I have tried using different instructions and tried multiple times, but I am not able to ge...
Hi Everyone,We are looking at replacing our old APs and WLC in one of our hospitals which is 24/7. We will are building an SD-Access environment in parallel whereby we will stand up new 9100 series APs and 9800 WLC.There are many APs! I was wondering...
Hi all, I have a WLC 5508 controller running 8.5.140.0 and I am trying to move the access points off this controller to a 9800-l running ios-xe 16.12.3 When I move an AP from the 5508 to the 9800 it will not join.I have checked the other posts with s...
What is the minimum software version of WLC 3504 to allow Cisco Catalyst 9115 join in? Thank you!!!
Hi Experts,About the Web Authentication on C9800 WLC, we are using 17.3.7 IOS XE . And created a DHCP pool on it for Guest user ( push 8.8.8.8 and 8.8.4.4 as DNS server). We also configured the Web Authentication (Captive Portal - Consent), https, an...
Hi guys, good day.I have a problem with one of my new Ap 2802e, I have tried to joined to 9800 WLC but is not possible.Ap send Discovery msg to the WLC and it response the msg, but when the AP tries to Update the image.This is the msj that I receive ...
I configured a test environment composed of a WLC (8.2) connected to the internal network, where the Cisco ISE 3.0 is also connected.Via Mobility tunnel the internal WLC is connected to a WLC Anchor (8.8) located in the DMZ behind a firewall.There is...
Resolved! WLC 3504 Controller and AP 2802I-K9 WLAN
hi, I have a Cisco 3504 controller and some 2802i AP. I want to change my ISP. So my previous DNS will also be changed. So my question is will it create any problem on my wireless network if I change my DNS. Please help me.
Hello. I'm a beginner in Wireless area I manage wireless network using WLC 9800 (version 17.3.5) and 9120 AP. We're running on SDA environtment All connected clients are experiencing intermittent loss of connection and also slow connection when the ...
Resolved! 7510 WLC and CSCwd80290
Hello Community!Ther is an old 7510 WLC which will be replaced one day but this day didn't come yet.Looks like last firmware for it AIR-CT7500-K9-8-5-182-0.aes and it's affected by CSCwd80290.And recommended 8.5.182.7 for this model isn't avalible. T...
Hi together,is there any chance to get a overview of the ingoing and outgoing traffic (bps) through every dynamic vlan interface on the WLC?I know there is the "show stats port summary" and "show stats port packets" commands on CLI to view the in and...
Hi Everyone, One question please, can I implement a wireless fabric, without needing to implement a LAN fabric? Since I need to make a wireless POC, but to avoid many configurations, I want to see the option of having only one wireless fabric without...
