Cisco 1905 Router Login Trouble

[rafaelsolano]

I've a setup where the customer is using 1905 router for Internet access. They have a LAN segment with 192.168.1.0/24 and an WAN segment of 150.129.126.168/29 provided by ISP.

Right now they are using a D-Link router for internet access and its working fine. But when we use the Cisco router with below config, it keeps redirecting them to this  different IP address everytime a user puts up something in the url bar.

Cisco Config:

interface gi0/0------ 192.168.1.1/24 (LAN)

interface gi0/1------ 150.129.126.170/29 (WAN)

ip route--------------- 0.0.0.0 0.0.0.0 150.129.126.169

DHCP pool --------- 192.168.1.180 to 192.168.1.199

Any suggestion and help in this regard would be highly appreciated :).

[majid.jaffari1]

Hello rafaelsolano,

please send the configuration of your cisco router!

[Mark Malone]

Hi
did you setup NAT on the Cisco router , the DLINK maybe performing some features automatically as its not a CLI router and they can come ready to plug and play for users while the Cisco may need to have them turned on in CLi as they come generally blank config apart form hidden running config in background

The config would help , just remove anything sensitive like passwords

[rafaelsolano]

Where do I find the configuration?

[Mark Malone]

You would need login to the router to get the configuration , if you have not accessed it before it is done over console generally, the link below shows you how , then when you have access you can issue the show run command to see whats configured currently

https://dcloud-cms.cisco.com/help/access_router_cli

[majid.jaffari1]

Hi again here,

are you able to configure it further?

[balaji.bandi]

By Defautl other vendor configuration NAT available when you configure over GUI (D-Link router)

make sure you have NAT in Place for the RFC 1918 IP address to WAN IP or WAN In terface.

example NAT Config as below :

https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/13773-2.html