Cisco 2504 Bonjour mDNS policy

[avit]

Hi,

we have some apple tv's in in a certain wired VLAN, they can be seen in all WLANS / SSIDS, all works perfect.

now, we need to limit some apple tv's to be seen on a certain WLAN. Some other apple tv's need to be seen in both SSIDS.. this can be accomplished by a mDNS policy / mDNS service groups... but they need to have the Role Names / User Names field to apply the policy to a certain user.

Now, we dont have ISE or prime infrastructure.. the SSIDs have PSK authentication.

The question is: can the mdns policy be applied on a certain SSID / wlan only?

thank you very much

Martijn

[jlhainy]

Here are some docs that should help.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/5500/white-paper/apple_bonjour/apple_bonjour_services/apple_bonjour_services_chapter_01.html

https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series-access-point/113443-cuwn-apple-bonjour-dg-00.html

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/WLAN-Bonjour-DG.html

[avit]

Hi

yes, i've been through them all, the policy is designed to expect a role names / user names input field from ISE or an AAA server...which this deployment doesnt have. so the attribute which comes withing the response of the ISE or AAA is not present...the WLANS have just PSK authentication. is there a way to mimic the role names / user names field from a SSID / WLAN?