Cisco 2504 with AIR SAP 1602I-e

[Gezimvatovci]

Hi,

I have a CUCM manager I already configure everything but i stuck on phone 7926 phone.

I need a little guide to configure wlc 2504 with 2 vlans ( vlans 26 and 40  ).

vlan 26 is for voice to connect phone 7926 and vlan 40 for internet users.

do i need to confiure just wlc 2504 with vlans or also these vlans is needed to configure on ap 1602 .

THNX,

GV

[Rasika Nayanajith]

First make sure your 2504 is configured properly. Refer below deployment guide

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

Then create a WLAN & map vlan 26 interface to it. You need to apply Platinum QoS profile for this SSID

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/68100-wlan-controllers-vlans.html

HTH

Rasika

*** Pls rate all useful responses ***