03-04-2013 08:24 PM - edited 07-03-2021 11:40 PM
Hi Team,
We have a 8 Access points connected to a WLC. We are constantly getting the below alerts on one of the access point. I am not able to find out exactly what that error means.
Any help much appreciated.
Message: Air Quality Index on Channel '11' is '98' (Threshold:'35'). Unclassified Severity Index is '30' (Threshold:'20').Reported by AP:'AP KPAP0000.1b3e, Interface 802.11b/g/n'.
Thanks
Nachi
Solved! Go to Solution.
03-04-2013 08:29 PM
Here is a link
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b4bdc1.shtml#ca3
Sent from Cisco Technical Support iPhone App
03-04-2013 08:26 PM
Air quality index that high I wouldn't worry about that alert at all.
Sent from Cisco Technical Support iPhone App
03-04-2013 08:41 PM
Hi Scott,
Thank you for your reply. I will read the document.
03-04-2013 10:23 PM
If you want the Air Quality messages to stop then you can disable CleanAir.
03-04-2013 08:29 PM
Here is a link
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b4bdc1.shtml#ca3
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide