Cisco 5508 series WLC alerts

[Nachiappan Nachiappan]

Hi Team,

We have a 8 Access points connected to a WLC. We are constantly getting the below alerts on one of the access point. I am not able to find out exactly what that error means.

Any help much appreciated.

Message: Air Quality Index on Channel '11' is '98' (Threshold:'35'). Unclassified Severity Index is '30' (Threshold:'20').Reported by AP:'AP KPAP0000.1b3e, Interface 802.11b/g/n'.

Thanks

Nachi

[Scott Fella]

Air quality index that high I wouldn't worry about that alert at all.

Sent from Cisco Technical Support iPhone App

[Nachiappan Nachiappan]

Hi Scott,

Thank you for your reply.  I will read the document.

[Leo Laohoo]

If you want the Air Quality messages to stop then you can disable CleanAir.

[Scott Fella · Accepted solution]

Here is a link

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b4bdc1.shtml#ca3

Sent from Cisco Technical Support iPhone App