06-01-2016 02:51 AM - edited 07-05-2021 05:09 AM
Hi
I have installed a 5508 WLC running version 7.0.220.0 and set it up as a Guest Anchor. The customer wants to install a SHA 2 SSL certificate. Do I need to upgrade the code to do this and if so to what version?
Thanks
06-01-2016 08:50 PM
You have to upgrade to AireOS 8.0.x or above.
I would suggest go with 8.0.MR3 code given below
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80mr3.html
Check your AP model & its compatibility
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735
HTH
Rasika
*** Pls rate all useful responses ***
06-10-2016 07:06 AM
Thanks for the response, though I have found that SHA2 can go on a WLC running 7.3.101, I've tried it and it works.
06-10-2016 05:28 PM
I was going to say I think I have SHA2 working on 7.6.
06-02-2016 08:49 PM
The WLC supports SHA-2 certificates since release 8.0.100, check the compatibility of access points with IOS version support and 8.0.133 is TAC recommended version.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide