Cisco 9115 AP - Wireless Controller - Registration

[vikrammurudkar7589]

Hi,

Does Cisco 9115 AP require Wireless Controller to registering the device?

Regards,

Vikram Murudkar

[inderdeeps]

@vikrammurudkar7589 : yes required WLC to connect and register. Once connected to WLC, it will have CAPWAP tunnel to authenticate.

[vikrammurudkar7589]

Hi Inderdeeps,

Thanks for the response.

But, in the Cisco 9115 AP, we can make 1 AP as a standalone controller to manage other AP's, right? including registering of the other AP's. Correct me if I'm wrong. 

I'm just a bit confuse about this.

Regards,

Vikram Murudkar.

[inderdeeps]

@vikrammurudkar7589 : Check configuration and deployment of Cisco AP 9115

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9115ax/quick/guide/ap9115ax-getstart.html#pgfId-69227 

[marce1000]

 - FYI : https://www.cisco.com/c/en/us/support/docs/wireless/embedded-wireless-controller-on-catalyst-access-points/215303-embedded-wireless-controller-conversion.html?referring_site=RE&pos=1&page=https://www.cisco.com/c/en/us/support/wireless/embedded-wirele...

 M.

[marce1000]

 - For details look into :

            https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 M.