05-15-2023 04:16 AM
Hi All,
Running 9800-40 WLC's Version 17.6.4 and DNAC Version 2.3.3.6-70045, would like to utilise the new AP "ZONES" feature via DNAC.
What version of WLC code is supported? Any docs/advise would be helpful.
Cheers,
05-15-2023 04:39 AM
Hi
AP Zone should be configured from Advanced Configuration on the Provision Device
"
Note |
Advanced configuration is supported on Cisco Catalyst 9130AXE Unified Access Points with Cisco Catalyst 9800 Series Wireless Controller software release 17.6 or later." |
Step 1 |
Click the menu icon (
) and choose Provision > Network Devices > Inventory. The Inventory window displays the device information that is gathered during the discovery process.
|
||||||
Step 2 |
Check the check box next to the AP that you want to provision. |
||||||
Step 3 |
From the Actions drop-down list, choose Provision > Provision Device. |
||||||
Step 4 |
In the Assign Site step, configure the following parameters:
|
||||||
Step 5 |
In the Configuration step, configure the following parameters:
|
05-15-2023 06:29 AM
Thanks for the info, Surely the AP ZONES need to be defined first? Was thinking more of - Design> Network Profiles> Edit wireless profile> AP Zones> Add AP Zone ???...
Then create TAG, tag required AP's ???... Re-provision device
"AP Zone should be configured from Advanced Configuration on the Provision Device" Using 9120axi AP's, have I missed something regarding this??..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide