Cisco 9800-CL Licensing to On-Prem

[Joshua Head]

Hi,

Is anyone able to assist with the licensing of the Cisco 9800-CL to and on-prem license server. I have found the below documentation:

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/217348-configure-troubleshoot-catalyst-9800-w.html#toc-hId--779108498

The following looks to present what I require:

Connected to SSM On-prem

Configuration with On-prem SSM is fairly similar to direct connection. On-prem needs to run version  8-202102 or newer. For SLUP releases (17.3.2 and later), it is advised to use the CSLU URL and transport type. The URL can be obtained from the On-prem webUI interface under Smart Licensing > Inventory > <Virtual Account> > General section.

configure terminal
 ip http client source-interface <interface>
 ip http client secure-trustpoint <TP>
 license smart transport cslu
 license smart url https://<on-prem-ssm-domain>/SmartTransport
 crypto pki trustpoint SLA-TrustPoint
  revocation-check none 
 exit
write memory
terminal monitor

On-prem SSM does not require the use of a trust token.

Is this all that is required? Plus a sync between on-prem and CSSM?

[marce1000]

  - That should be all what is needed ; the sync should happen automatically ; as explained in the document.
     Use the terminal monitor command first when configuring Smart Licensing.

 M.

[balaji.bandi]

check example i used for on prem :

https://www.balajibandi.com/?p=1286